LUCIAS
Lucias is a high intensity focused light source with a standard E27 lamp base
Lucias LED units incorporate special microprocessor controlled circuitry to decode our advanced combined power and data system and control a high intensity focused single colour white, RGB or RGBW LED
The LEDs are driven with true linear variable current, not PWM, making the system ideal for use in studios and situations where cameras are present
 |  |
|---|---|
 |  |
 |  |
 |
Details
Lucias is a high intensity focused light source with a standard E27 lamp base. This combination realises a versatile light source which takes advantage of the huge range of standard E27 light fittings.
The system uses our combined power and data technology which allows full independent control of up to 100 LED units all on the same electrical circuit.
Lucias LED units incorporate special microprocessor controlled circuitry to decode our advanced combined power and data system and control a high intensity focused single colour white, RGB or RGBW LED
Up to 100 Lucias LEDs can be connected on a single two conductor cable.
Each LED unit is independently controllable despite being on the same cable. LED units connect to the RM500 power unit which accepts DMX data. The RM500 can also record /playback DMX shows.
The LEDs are driven with true linear variable current, not PWM, making the system ideal for use in studios and situations where cameras are present.
Main features
• Up to 100 Lucias LEDs can be connected on a single two conductor cable
• The LEDs are driven with true linear variable current (not PWM)
• Allow for a high intensity focused single colour white, RGB or RGBW LED
• Connect to the RM500 power unit which accepts DMX data
• Super smooth fading with linear LED current control (not PWM)
• Easy installation - Fits standard E27 ES lamp holders
• Polarity insensitive
• Protection included preventing failure of a single LED unit compromising the whole system
• Designed and manufactured in the UK
• Optional DMX control byte to place power unit into low power standby
• 110 / 230VAC input
• Power consumption 600W max
• Output voltage 48V
• 100M max festoon cable length
• Max operating Temperature 40C (Fan cooled)
Power unit
RM200 and RM500 power units provide the DC supply and combined power and data to control lamps or LED units
The power units accept DMX data converting this to the special combined power and data format
Power units have DMX record capability for standalone operation
They can also be programmed using Glasson Electronics' show creation software
As with all Glasson Electronics products power units are designed and manufactured in-house
• Protected from lamp wiring faults
• DMX data input
• DMX record/playback facility
• Universal 90/264VAC input
• Power consumption 260W (RM200) 600W (RM500) max
• Comprehensive self diagnostic system
• 100M max festoon cable length
• Size 246 x 200 x 75mm (RM200) 230 x 300 x 75mm (RM500)
• Weight 2.4Kg (RM200) 3.2Kg (RM500)
• 40C maximum operating temperature
Handheld programmer
A commissioning and maintenance tool, the hand programmer facilitates quick programming of an LED / Lamp holder units address
For DFS1000 and 3000 the LED unit is briefly attached to the hand programmer to set the address
For DFS200 the lamp holder is temporarily inserted into the lamp socket in place of the lamp
For Orbis, Praeclarus and DFS4000 a different version programs the LED unit address using a short range infra red link
The hand programmer can also read an LED units address and invoke an LED test
Programming typically takes 4 seconds
